$100.00 USD

[christoph]

I'd go $200.00 for a PRR M1 or a K4 or an I1.  They don't have to be DCC or have sound either.

Same here  ;D

[sundowner]

For $100 I would love a correct CSX GE ES44DC and not a BNSF loco with a CSX paint job.

Ill go $150 for a correct CSX GE AC6000.

As an aside, CSX is currently downrating them to ES40DCs

I know, they also did the -8.5(9), must be an east coast RR thing.

[sundowner]

For $100 I would love a correct CSX GE ES44DC and not a BNSF loco with a CSX paint job.

Ill go $150 for a correct CSX GE AC6000.

I will pay $500 for a z scale  CSX AC6000CW. Its not cheap to run z. ;D

I try Z and like it but the prices were just to much. To bad the Oversize and Horribly Oversize got the AC60.

[oakcreekco]

A five pack, or four, of undecorated MTL heavy weight coaches when they come out!

The first two releases are VERY nice for the bucks.

[jnevis]

4-5(prefer 9-10 but that's a stretch) modern Trinity 70' reefers, ARMN/UP, maybe even some in BNSF
GenSets, UP, CFNR, M&ET, BNSF
MP36/40 CalTrain
F40PH-2C Altamont Commuter Express
Bombardier commuters ACE, CalTrain
Bi-Level Commuters, CalTrain
Ten Wheeler 4-6-0 WP

Oh yeah, almost forgot
SW1500 CCT, WP, UP
DETAIL PARTS, Sunrise E/F/PA plows , WP horns/Barrel lights, Geep noses w/different light configurations ect I have some but they won't last forever. Even have what looks to be masters for some but I can't do anything with them.

[hnipper]

I'd lay my $C-note downpayment for a B&O BigSix, or a UP FEF, dcc/sound ready please.

Laurel Valley Hoppers, Lee? Already sent in my deposit for those!!!! Get 'em while they're hot....

Henry

[CBQ Fan]

$100 each for an E5A and an E5B from Kato or Atlas or I would even try FVM.

[Denver Road Doug]

$100 each for an E5A and an E5B from Kato or Atlas or I would even try FVM.

I might even jump on that bandwagon, too!

[SkipGear]

$100 each for an E5A and an E5B from Kato or Atlas or I would even try FVM.

I might even jump on that bandwagon, too!

Include B&O EA/EB set, Santa Fe E3 on that bandwagon and I would take one of each. I'm not even a Santa Fe fan. I just like those early E units.

Other $100 items include:

4-4-2
4-6-0
4-6-2 Heavy Pacific (I'd even settle for a K4)
2-10-0 or 2-10-2 of reasonable wheelbase, not the ConCor stretch limo.
S1/2/3/4
45 Ton (w/side rods)
GP30 High Hood
GP50 (not high hood)

[wcfn100]

Jason

[Nato]

    The Entire 1936 Union Pacific City Of Denver Passenger train and the matching Locomotives. Overland Models did it in HO maybe 12 or so years ago I contacted them about an N Scale version was told there was not enough demand for N. I'am sure they stilll have all the working drawings which could be scaled down to N Scale. My second choice (choices) would be any of the Brass passenger trains I had pre reserved from Rail Classics which were all cancled, Empire Builder all postwar eras, North Coast Ltd.,Canadian/Dominion Budd built train old Maroon scheme, later CP red scheme. Nate Goodman (Nato). Salt Lake, Utah.

[Catt]

N scale?

Gen sets undec,NS,CSX

GP40-2W

Z scale?

realistically priced GP 38,40,50,60s plus dash 2s on the 38/40s

[brokemoto]

1880s or 1890s ten wheeler

1880s eight wheeler

eight packs of nineteenth century high side, hopper bottom gonodolas

eight packs of 1880s/1890s tank cars.

[SirTainly]

Definitely something switchery, SW1500, MP15AC or an S-6.